 |  |  |  |
We are a factory authorized service center.
Repairing Aquabots since 1983
Water Works Marketing has several options to keep your Aquabot running like new. You can send your Aquabot to our authorized service center. You can order from our complete stock of replacement parts. Or select our new trade-in option. Send in you old bot for a great deal on a new one. Call for details 1-973-715-9525.
Call For Other Models
The blue chart below has the most commonly orders items
Item Number | PART # | DESCRIPTION | UNITS | RETAIL | BUY NOW |
17 | 2600 | BUSHING (White, Plastic) - For use on all Side plates to lock-in Wheel Tube Assemblies | EACH | $2.76 | |
23 | A2900 | BRUSHES (Black Sponge Foam) - Aquabot, Aquabot Turbo, Aquamax Jr, Merlin, Bravo | PAIR | $62.98 | |
24 | 3002B | BRUSHES (Blue Molded Rubber) - ABOT, AB Turbo, AMAX Jr, Merlin, Bravo, Ultramax ** | PAIR | $73.88 | |
25 | S3103 | H-FLOAT (Foam, Plastic, with Screws) - All wall-climbing units may need this to climb | ASSEMBLY | $10.98 | |
26 | 3104 | SIDE POCKET FLOATS (White, Foam Rectangle Blocks)- Wall-climbing units may use them | PAIR | $3.50 | |
27 | 3200 | DRIVE TRACK (Black) | EACH | $20.98 | |
27 | 3201 | DRIVE TRACK (Blue) | EACH | $20.98 | |
28 | 3302 | DRIVE BELTS (Tan) | PAIR | $16.40 | |
29 | 3400B | SIDE PLATE (Blue, no holes) - Aquabot, Aquabot Turbo, Aquamax Jr HT, Aquamax Jr + | EACH | $27.88 | |
32 | 3506 | STEPPED SLEEVE ROLLER (White) - Supports Drive Belt, installs on the upper Side Plate leg | EACH | $2.60 | |
35 | A38000 | WHEEL TUBE ASSY (Aquabot, Merlin, Bravo) ** does not use retaining rings | ASSEMBLY | $65.98 | |
44 | 7101 | FUSE (2.5 Amp, 250 Volt, Slow-Blow) - ABOT, AB Turbo, ABT RC/Solo, Merlin, Bravo | EACH | $2.90 | |
N/A | 800135 | MAIN DRAIN BUMPER - For use on any Pool's main drain that impedes the cleaner's movement | EACH | $40.28 | |
47 | 8200 | FILTER BAG (Mesh) - AB, ABTurbo, AB+RC, AMAX Jr, Merlin, Bravo, PHV50/300, Jet's, UMAX ** | EACH | $46.75 | |
47 | 8100 | FILTER BAG (Fine) - AB, ABTurbo, AB+RC, AMAX Jr, Merlin, Bravo, PHV 50/300, Jet's, UMAX ** | EACH | $48.97 |
Item Number | PART # | DESCRIPTION | UNITS | RETAIL | BUY NOW |
1 | A10000B | HANDLE ASSY. (Blue & White, Bracket included) - Aquabot, AB+RC, AB Turbo, AMAX Jr. | ASSEMBLY | $103.88 | |
2 | S1100 | BRACKET FOR HANDLE (White, OLD) - all units except Merlin and Bravo | EACH | $34.85 | |
2 | S1100B | BRACKET FOR HANDLE (Blue) - all units except Merlin and Bravo | EACH | $34.85 | |
3 | 1105 | SCREW (10-32, 7/8", Phil Pan Head) - For securing the Handle Bracket to the Body Assembly | EACH | $1.20 | |
4 | 1603 | FLOAT BALL (Light Blue, Small) - For OLD Cable Assembly with Float Balls | EACH | $3.50 | |
5 | 1601 | PLUG (3-Pin, Female, 2-Wire) - Aquabot, AB Turbo, AMAX Jr HT/+, AMAX, Merlin, Bravo | ASSEMBLY | $13.80 | |
5 | 1604 | KEY FLOAT (Lock for Float Ball) - For OLD Cable Assembly with Float Balls | EACH | $0.60 | |
6 | A1652 | CABLE ASSY. (2-Wire, 51 Foot, Floating) - Aquabot, Power Handi-Vac 50 | ASSEMBLED | $239.98 | Must be installed by the dealer |
6 | A1661 | CABLE ASSY. (2-Wire, 60 Foot, Floating) - AB Turbo, AMAX Jr HT, Merlin, Bravo, PHV 100 | ASSEMBLED | $245.50 | Must be installed by the dealer |
6 | A1675F | CABLE ASSY. (2-Wire, 75 Foot, Floating) - Aquabot Plus, Aquamax Jr HT | ASSEMBLED | $306.98 | Must be installed by the dealer |
6 | A16475 | CABLE ASSY. (4-Wire, 75 Foot, Floating) - Aquabot Turbo Solo, Aquabot Turbo RC | ASSEMBLED | $396.98 | Must be installed by the dealer |
| 6 | 57930 | EZ Swivel Assembly | EacH | $43.98 | |
7 | 2100 | P-CLIP (1/4", Plastic) - For securing the non-foam-insulated part of a 2-wire cable to the Body | EACH | $1.20 | |
8 | 2101 | P-CLIP (5/16", Plastic) - For securing the non-foam-insulated part of a 4-wire cable to the Body | EACH | $1.20 | |
8 | 2102 | P-CLIP (7/16", Plastic) - For securing the foam-insulated part of a 2-wire cable to the Handle Assy. | EACH | $1.20 | |
8 | 2104 | P-CLIP (3/8", Plastic) - For securing the non-foam-insulated part of a 4-wire cable to the Body | EACH | $1.20 | |
8 | 2111 | P-CLIP (5/8", Coated Steel) - For securing the insulated part of a 4,7,9-wire cable to the Handle | EACH | $2.30 | |
9 | A22000-W2H | BODY ASSY. (White, w/ Holes, Lock Tabs, Pin, Outlet Bottom, Inserts) - AB Turbo RC/Solo | ASSEMBLED | $130.80 | |
9 | A22000 | BODY ASSY. (White, with all Holes, Lock Tabs, Pin, Outlet Bottom, Inserts) - Aquabot | ASSEMBLED | $130.80 | |
10 | 2230B | OUTLET TOP (Top and Bottom) - For all units except those with an Outer Shell, Merlin, Bravo | 2 PIECES | $28.60 | |
11 | 2251 | SCREW (8-18, 3/4", Phil No-head) - For securing Pump Motors to the Body Outlet Top | EACH | $1.20 | |
12 | 2260 | SCREW (#6, 7/16", Phil Pan-Flat Head) - To secure a P-Clip when the hole is shallow | EACH | $1.20 | |
12 | 2260 | SCREW (#6, 7/16", Phil Pan-Flat Head) - To secure the Top and Bottom of the Outlet closed | EACH | $1.20 | |
12 | 2260 | SCREW (#6, 7/16", Phil Pan-Flat Head) - To secure the H-Float to the Bottom Lid | EACH | $1.20 | |
13 | 2300 | ANTI-ROLL BRACKETS (Plastic) - Install raised-up, on top of Body Assembly to prevent rolling | SET OF 4 | $11.10 | |
14 | 2303 | SCREWS (18-8, 8/32" x 1/2", Phil Bev Head) - To secure the Lock-Tabs to the Body Assembly | EACH | $1.20 | |
15 | 2305 | DRAIN VALVE FLAPS (OLD, Rubber) - For use to cover the large holes at corners of old units. | SET OF 4 | $4.40 | |
16 | 2500 | SCREW (#8, 1-1/4" Pan Head) - For securing the DC Pump's Back Plate Block to the Body Assembly | EACH | $1.20 | |
16 | 2500 | SCREW (Pan head) - For securing all White Drive Motors, or Black Motors with Spacer Bracket | EACH | $1.20 | |
17 | 2600 | BUSHING (White, Plastic) - For use on all Side plates to lock-in Wheel Tube Assemblies | EACH | $2.76 | |
18 | 2604 | BUSHING (OLD, small sleeve) - For the end of older Pulley Assemblies like A3608 | EACH | $1.20 | |
18 | 2602 | WASHER (White, 5/8"od, Nylon) - Use when Pin Support Bushing is shallow to take up space | EACH | $1.20 | |
19 | 2610 | BUSHING (White, Plastic) - For use on some Side plates to lock-in the Body's Pin Support | EACH | $4.40 | |
20 | 2700 | SCREW (#8, 11/16", Phil Pan-Flat Head) - To secure the upper part of the Sideplate on the Body | EACH | $1.20 | |
21 | 2701 | SCREW (#8, 11/16", Phil Pan Head) - To secure the Side plate on the lower edge of the Body | EACH | $1.20 | |
N/A | 3402 | LOCK-NUTS (Hex, Nylon insert) - For securing the Screws of the Anti-Roll Brackets | EACH | $1.20 | |
N/A | 2400 | NAIL PLUG (White, Plastic) - Use to plug small holes on the Body used for Anti-Roll Brackets | EACH | $1.20 | |
22 | 2702 | SCREW (#6, 11/16", Phil Pan-Flat Head, Pointed) - For securing the Filter Screen to the Body | EACH | $1.20 | |
22 | 2800 | WIRE RETAINER CLIP (OLD, Pre-shaped Wire) - Use w/ Locking Plate to secure Bottom Lid | $1.20 | ||
23 | A2900 | BRUSHES (Black Sponge Foam) - Aquabot, Aquabot Turbo, Aquamax Jr, Merlin, Bravo | PAIR | $62.98 | |
24 | 3002B | BRUSHES (Blue Molded Rubber) - ABOT, AB Turbo, AMAX Jr, Merlin, Bravo, Ultramax ** | PAIR | $73.88 | |
24 | 3003B | BRUSHES (Black Molded Rubber) - ABOT, AB Turbo, AMAX Jr, Merlin, Bravo, Ultramax ** | PAIR | $73.88 | |
24 | 3009 | BRUSHES (Light Blue PVA Foam) - Aquabot, AB Turbo, AMAX Jr, Merlin, Bravo, UMAX ** | PAIR | $115.50 | |
25 | S3103 | H-FLOAT (Foam, Plastic, with Screws) - All wall-climbing units may need this to climb | ASSEMBLY | $10.98 | |
26 | 3104 | SIDE POCKET FLOATS (White, Foam Rectangle Blocks)- Wall-climbing units may use them | PAIR | $3.50 | |
27 | 3200 | DRIVE TRACK (Black) | EACH | $20.98 | |
27 | 3201 | DRIVE TRACK (Blue) | EACH | $20.98 | |
27 | 3203 | DRIVE TRACK with TRACTION TABS (Blue) - For all Model 'G' units | EACH | $20.98 | |
28 | 3302 | DRIVE BELTS (Tan) | PAIR | $16.40 | |
29 | S3400B-8H | SIDE PLATE (Blue, 8 holes, 4 for Bolts, 4 for Piston Clamps) - Aquabot Turbo Solo / RC | EACH | $28.60 | |
29 | 3400B | SIDE PLATE (Blue, no holes) - Aquabot, Aquabot Turbo, Aquamax Jr HT, Aquamax Jr + | EACH | $26.30 | |
29 | 3400BK | SIDE PLATE (Black, no holes) - Aquabot, Aquabot Turbo, Aquamax Jr HT, Aquamax Jr + | EACH | $26.30 | |
29 | 3400W | SIDE PLATE (White, no holes) - Aquabot, Aquabot Turbo, Aquamax Jr HT, Aquamax Jr + | EACH | $26.30 | |
30 | 3500 | SMALL ROLLER (White, Plastic) - Supports the Drive Track, install on lower legs of Side Plate | EACH | $2.60 | |
32 | 3506 | STEPPED SLEEVE ROLLER (White) - Supports Drive Belt, installs on the upper Side Plate leg | EACH | $2.60 | |
32 | 3607 | WASHER - For Pulley Assembly - install with rounded edges facing Drive Belts | EACH | $5.50 | |
32 | 3603 | WASHER (Nylon, Flat) - For each end of the Wheel Tube | EACH | $1.20 | |
N/A | 2675 | MODEL G SPACER BRACKETS ** necessary with 'Model G' Drive Tracks | SET OF 4 | $4.60 | |
N/A | 5173 | WEIGHTS (Black, Coated, with Inserts and Screws) - Wall-climbing units may need them | PAIR | $6.58 | |
33 | A3600 | PULLEY ASSEMBLY (Short) - For most Residential units with White Drive Motors | EACH | $26.40 | |
34 | 3700 | LARGE ROLLER (White, Plastic) - Supports the Drive Track, installs on Body's Pin Support | EACH | $3.40 | |
35 | A38000 | WHEEL TUBE ASSY (Aquabot, Merlin, Bravo) ** does not use retaining rings | ASSEMBLY | $65.98 | |
35 | A38205 | WHEEL TUBE ASSY (Aquabot, Aquabot Turbo, Aquamax Jr HT, Aquamax Jr Plus) | ASSEMBLY | $65.98 | |
35 | A38205MG | WHEEL TUBE ASSY (Aquabot, Aquabot Turbo, Aquamax Jr HT, AMAX Jr +) - Model 'G' | ASSEMBLY | $65.98 | |
36 | 4400 | PROPELLER (Black) - For Pump Motor, tap onto half-circle shaped motor shaft. | EACH | $11.56 | |
37 | 4501 | SCREW (5/8") - For sealing the Terminal Cover onto the Basin of all White Drive Motors | EACH | $1.20 | |
38 | 4613 | SPIRAL PIN (3/4", solid Stainless Steel) - For the shaft end of every Drive Motor, use Lock-Tite | EACH | $1.20 | |
39 | 4618 | BRASS NUTS (Hex, small) - For attaching the Loop Connectors of wires to Brass Terminals | EACH | $1.20 | Must be installed by the dealer |
40 | 4619 | LOOP CONNECTOR (Aluminum, crimp) - For attaching Motor wires to Brass Terminals | PAIR | $1.20 | Must be installed by the dealer |
41 | 5000 | TERMINAL COVER (Plastic, Rectangle) - For sealing up the Basin in all White Drive Motors | EACH | $2.30 | |
42 | 5300 | FILTER SCREEN (White, Cage) - AB, AB Turbo, AB+RC, AMAX Jr, PHV 50/300 UMAX ** | EACH | $26.30 | |
44 | A7060 | POWER SUPPLY (3-Prong, Male Socket) - Aquabot | ASSEMBLED | $153.50 | |
44 | A7061 | POWER SUPPLY (3-Prong, Male Socket) - Aquabot Plus | ASSEMBLED | $153.50 | |
44 | 7073 | POWER SUPPLY (3-Prong, Male Socket, 7hr External Dial Timer) - Aquabot Turbo | ASSEMBLED | $162.98 | |
44 | A7091 | POWER SUPPLY (4-Pin Male, 7hr External Dial Timer, Radio RC) - AB Turbo Solo / RC | ASSEMBLED | $322.88 | |
44 | 7108 | SOCKET ASSY. (3-Pin, Male, 2-Wire) - ABOT, AB Turbo, JET unit's, AMAX Jr, AMAX) | ASSEMBLY | $9.90 | Must be installed by the dealer |
44 | 7135 | SOCKET ASSY. (4-Pin, Male, 4-Wire) - AB Turbo Solo, AB Turbo RC, Aquamax Biturbo) | ASSEMBLY | $32.12 | Must be installed by the dealer |
44 | 7005 | FUSE HOLDER (Standard, Push & Turn style) - All units Residential and Commercial | ASSEMBLY | $7.68 | |
44 | 7101 | FUSE (2.5 Amp, 250 Volt, Slow-Blow) - ABOT, AB Turbo, ABT RC/Solo, Merlin, Bravo | EACH | $2.90 | |
44 | 7111 | RESET SWITCH (Standard, Black button, 2-Wire) - ABOT Turbo, AB Turbo Solo/RC | EACH | $11.00 | |
44 | 7106 | LIGHTED SWITCH (Standard, Red, 3-Wire) - For every Power Supply | EACH | $7.70 | |
44 | 7041 | HANDLE (Plastic, with Screws, Nuts, and Star Washers) - All ABOT, all AMAX, all PHV | ASSEMBLY | $5.88 | |
44 | 7041A | HANDLE (Rubber, with Holders, Screws, and Nuts) - Ultramax, UMAX Jr ..and most others | ASSEMBLY | $5.88 | |
44 | 7102 | CORD FOR POWER SUPPLY (3-Wire, Green, Black, and White) - For all Power Supplies | EACH | $11.00 | |
44 | 7074 | TIMER 7 HOUR (External, Dial, 120 Volt) - AB Turbo, AB Turbo Solo, AB Turbo RC | EACH | $49.50 | |
N/A | 300109 | CLAMP (Grey, Plastic) - To hold the DC Pump to the Back-Plate and the Piston to the Side Plate | EACH | $2.60 | |
N/A | 300107 | BACK PLATE BLOCK (Grey, 4 holes) - To support the DC Pump inside of the unit | EACH | $1.95 | |
44 | 6204 | SPACER (Plastic, cylinder) - Use between the DC Pump Back Plate and the Body Assembly | EACH | $0.70 | |
N/A | 2301 | SCREW (10-32, 1/2" Phil Pan Head) - For securing the Grey Clamp and Piston on the Side Plate | EACH | $1.20 | |
N/A | 3007 | CLIMBING RINGS (Light Blue PVA, 1" thick) - Use on any unit, fitted over Rubber Brushes ** | SET OF 4 | $25.20 | |
44 | A7068 | POWER SUPPLY (OLD, 4-Pin Male, 7hr Internal Timer, Wired RC) - AB Turbo Solo / RC | ASSEMBLED | $349.13 | |
44 | A220200 | RECEIVER (NEW, Radio, 2-Way) - Aquabot Turbo Solo, Aquabot Turbo RC, AMAX Bit RC | EACH | $199.95 | |
44 | 220104C | TRANSMITTER (Radio, 1-Way, Yellow w/ 1▲) - ABT Solo ** must use A220200 Receiver | ASSEMBLED | $44.95 | |
44 | A2250 | TRANSMITTER (OLD, Wired, 2-Way, Black w/ 2∆) - ABT RC's, AMAX RC's | ASSEMBLED | $44.95 | |
44 | 220105C | TRANSMITTER (Radio, 2way, Yellow w/ 2▲) - ABT RC's, AMAX RC's **A220200 Receiver | ASSEMBLED | $59.95 | |
N/A | 1609 | TIE (Blue, #4, Plastic, reusable) - For coiling the Cable Assembly among other things | EACH | $1.20 | |
N/A | 800135 | MAIN DRAIN BUMPER - For use on any Pool's main drain that impedes the cleaner's movement | EACH | $40.28 | |
45 | 7133 | LOCK-NUT (Nylon Insert, Hex) - To secure the Screws of the Lock-Tabs to the Body Assembly | EACH | $1.20 | |
46 | 8000 | FILTER BAG CLIP (Black, Short) - AB, AB Turbo, AB+RC, AMAX Jr, PHV 50/300 UMAX ** | PAIR | $7.64 | |
47 | 8200 | FILTER BAG (Mesh) - AB, ABTurbo, AB+RC, AMAX Jr, Merlin, Bravo, PHV50/300, Jet's, UMAX ** | EACH | $46.75 | |
47 | 8100 | FILTER BAG (Fine) - AB, ABTurbo, AB+RC, AMAX Jr, Merlin, Bravo, PHV 50/300, Jet's, UMAX ** | EACH | $48.97 | |
48 | 9100 | LOCKING PLATE ASSY. (OLD, White, Plastic, w/ Spring, Screw, Washers) | SET OF 2 | $10.70 | |
49 | A9200X | BOTTOM LID ASSY. (White, W-shaped Wire Frame) - Aquabot | ASSEMBLED | $86.90 | |
51 | 9204BL | LOCK-TABS (Blue, Plastic) - For All Body Assemblies, used to hold Bottom Lid to base of unit | SET OF 4 | $6.80 | |
52 | A9300 | INTAKE VALVE FLAP (Black PVC Rubber) - ABOT, AB Turbo, AMXJr, UMAX, PHV 50/300 | EACH | $1.70 | |
52 | 9305B-B | INTAKE VALVE FLAP (Blue Plastic) - Aquabot, AB Turbo, AMAX Jr, UMAX, PHV 50/300 | EACH | $4.34 | |
53 | 11058 | RETAINING RING (E-Clip) - New Style | EACH | $3.15 | |
53 | 800001 | PUTTY (Grey, Waterproof) - For waterproofing the Terminal Basin in all White Drive Motors | 1 Lb | $8.50 | Must be installed by the dealer |
54 | A4510A | DRIVE MOTOR (White, Terminal Basin) - Aquabot | ASSEMBLED | $281.50 | Must be installed by the dealer |
54 | A4510T | DRIVE MOTOR (White, Terminal Basin) - Aquabot Turbo, Aquamax Junior HT | ASSEMBLED | $303.33 | Must be installed by the dealer |
55 | A6001A | PUMP MOTOR (Aquabot) | ASSEMBLED | $159.50 | Must be installed by the dealer |
55 | A6001T | PUMP MOTOR (Aquabot Turbo, Aquamax Jr HT) | ASSEMBLED | $185.90 | Must be installed by the dealer |
Motors And Certain Other Parts
Can only be installed at our authorized service center please call for info.
Contact Information | |
| Telephone 1-973-715-9525
|
|
| FAX 1-201-438-3661 | Email sales@h2o-marketing.com |
| | | |